Chapter 4 Settings — [SECURITY] menu
Attention
f x
f
[CONTROL DEVICE SETUP]
1) Press as to select [CONTROL DEVICE SETUP].
f The [CONTROL DEVICE SETUP] screen is displayed.
3) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL]
You can set the limitation on the control from the control panel.
[REMOTE CONTROL]
You can set the limitation on the control from the remote control.
4)
f The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.
Press as to select [ENABLE] or [DISABLE].
f You can set the operation restriction from the control panel or the remote control.
[ENABLE]
Enables all button operations.
[DISABLE]
6)
f
7) Press qw
Note
f [MENU LOCK PASSWORD] screen is displayed.
Enter the menu lock password.
f The [MENU LOCK PASSWORD]
f
enter standby).
f
menu.
f
control are enabled.
To Next Page
Loading...
