Chapter 3 Basic Operations — Switching on/off the projector
6)
7)
8)
9)
Note
f →
x.
Switching off the projector
1)
2)
1)
4)
3)
2)
1) Press the power <v/bv
control.
f The [POWER OFF(STANDBY)]
Press qw
(Or press the power <v/bv
remote control again.)
f
keeps running.)
3)
lights in red.
4) Press the <OFF> side of the <MAIN POWER> switch to turn off the power.
Note
f
Turning on the power while the lamp is still hot may shorten the lamp life.
f
f The projector consumes power even when the power <v/bv
remote control is pressed and the projector is switched off if the main power of the projector is on.
→→
but the power consumption during standby can be conserved.
Direct power off function
the power cord is pulled out immediately after the projector is switched off.
Note
f
f
To Next Page
Loading...
