Chapter 3 Basic Operations — Operating with the remote control
Using the P IN P function
Locate a separate, small sub screen in the main screen to project two images simultaneously.
1)
f The setting will change each time you press the button.
Note
f Refer to the menu x for details.
the remote control so that it can be used as an easy shortcut button.
1)
Note
f → x.
Using the status function
You can display the status of the projector.
1)
f The [STATUS] screen is displayed.
RGB2
SXGA60+-A1
65.22kHz/ 59.99Hz
1h
100h
200h
300h
27°C/ 80°F
27°C/ 80°F
1/4
MENU
ENTER
EXITCHANGE
SEND STATUS VIA E-MAIL
AROUND LAMP TEMP.
INTAKE AIR TEMP.
: TOTAL
: NORMAL
LAMP: ECO
PROJECTOR RUNTIME
SIGNAL FREQUENCY
SIGNAL NAME
INPUT
STATUS
Note
f →(x.
Using the ECO management function
1)
Note
f → x page 87) for details.
To Next Page
Loading...
