Chapter 3 Basic Operations — Projecting
Moving the lens to the home position
To move the lens to the home position, perform the following procedure.
1)
control.
f The [HOME POSITION] screen is displayed.
LENS
HOME POSITION
EXECUTE
CANCEL
MENU
ENTER
f [HOME POSITION] screen, and the lens returns to the home position.
Note
f The home position of the lens is the lens position when the lens is being replaced or when the projector is being stored, and it is not the
optical center of the screen.
f You can also display the [HOME POSITION]
remote control for at least three seconds.
Perform the lens position shift within the adjustment range.
The focus may change when the lens position is shifted out of the adjustment range. This is because the movement of the lens is restricted
respective range.
Lens type
Zoom lens
PT-EW640
0.6 V
Image width H
0.1 H0.1 H
Image height V
0.6 V
Standard projection position
0.5 V
Image width H
0.1 H0.1 H
Image height V
0.5 V
Standard projection position
Note
f
To Next Page
Loading...
