Panasonic PT-EX510

Chapter 4 Settings — [NETWORK] menu

Example of the E-mail sent for an error
The following E-mail is sent when an error has occurred.
=== Panasonic projector report (ERROR) ===
Projector Type : EZ 580
Serial No : SN9250024
----- check system -----
MAI N CPU BUS [ OK ]
FAN [ OK ]
INTAKE AIR TEMPERATURE [ OK ]
AROUND LAMP TEMPERATURE [ OK ]
LAMP REMAIN TIME [ OK ]
LAMP STATUS [ OK ]
APERTURE(CO NTRAST-SHUT TER) [ OK ]
SHUTTER(MUTE-SHUT T ER) [ OK ]
INTAKE AIR TEMP.SENSOR [ OK ]
AROUND LAMP TEMP.SENSOR [ OK ]
BATTERY [ OK ]
AIRFLOW SENSOR [ OK ]
LENS MO UNTER [ OK ]
COVER OPEN [ FAILED]
PRESSURE SENSOR [ OK ]
ANGLE SENSOR [ OK ]
FI LTER UNIT [ OK ]
AIR FI LTER [ OK ]
(Error code00 00 00 00 00 00 00 00 00 00 00 00 20 00 00 00)
Int ake air t emperature : 45 degC / 113 degF
Around lamp temperat ure : 42 degC / 107 degF
PROJECTO R RUNTI ME 2500 H
LAMP ECO 100 H
LAMP NORMAL 200 H
LAMP REMAIN 1900 H
-------- Current status --------
MAIN VERSION 1.00
NETWORK VERSION 1.00
SUB VERSION 1.00
LAMP STATUS LAMP=ON
INPUT SIGNAL HDMI
SIGNAL NAME XGA60
SIG NAL FREQUENCY 65.4kHz / 54. 4Hz
REMOTE2 STATUS ENABLE
----- Wired Network configuration -----
DHCP Client OF F
IP address 192.168. 0.8
MAC address cc: 7e:e8: 00:00: 00
Tue Jun 04 22:29:33:2013
----- Memo -----
Note
f 
[Change password] page

1
2
3
1 [Administrator]

 [User]

3 [Next]
