Panasonic PT-MZ880

Chapter 4 Settings — [DISPLAY OPTION] menu
ENGLISH - 105
[OPEN]
The projector goes into projection mode with the shutter function disabled (shutter: opened) when the
power is turned on.
[CLOSE]
The projector goes into projection mode with the shutter function enabled (shutter: closed) when the
power is turned on.
Using the shutter function
Image and audio is turned off when the projector is not used for a specic time.
1) Press
as
to select [SHUTTER SETTING].
2) Press the <ENTER> button.
f
The
[SHUTTER SETTING]
screen is displayed.
3) Press
as
to select [SHUTTER].
4) Press the <ENTER> button.
f
Press the <MENU> button or the <RETURN> button to clear.
Note
f
The power indicator <ON (G)/STANDBY (R)> will blink green slowly while the shutter function is in use (shutter: closed).
f
To output audio while the shutter function is in use (shutter: closed), set the [PROJECTOR SETUP] menu
→
[AUDIO SETTING]
→
[IN
SHUTTER] to [ON].
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[COUNT UP]
Displays the elapsed time from when the count is started.
[COUNT DOWN]
Displays the remaining time against the time set in [TIMER].
Setting the countdown timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to set the time.
f
The time can be set from 1 minute to 180 minutes in one-minute interval.
f
The factory default setting is 10 minutes.
Note
f
[TIMER] can be set when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press
as
to select [P-TIMER].