Panasonic PT-MZ880

Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 63
Operating with the remote control
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to
turn off the image and audio temporarily.
button
1) Press the <SHUTTER> button.
f
The image and audio disappear.
f
This operation can be also performed by pressing the <SHUTTER> button on the control panel.
2) Press the <SHUTTER> button again.
f
The image and audio reappear.
Note
f
The power indicator <ON (G)/STANDBY (R)> will blink green slowly while the shutter function is in use (shutter: closed).
f
The fade-in/fade-out time of the image can be set in the [DISPLAY OPTION] menu
→
[SHUTTER SETTING] (
x
page 104).
f
To output audio while the shutter function is in use (shutter: closed), set the [PROJECTOR SETUP] menu
→
[AUDIO SETTING]
(
x
page 118)
→
[IN SHUTTER] to [ON].
f
The light source may be lit dimly due to warm up when the shutter function is used in the operating environment temperature of around 0 °C
(32 °F).
Using the mute function
Audio can be temporarily turned off.
button
1) Press the <MUTE> button.
f
The audio is muted.
2) Press the <MUTE> button again.
f
The audio is turned on.