Panasonic PT-MZ880

Chapter 7 Appendix — Technical information
184 - ENGLISH
Class Command Control details
Parameter/response
string
Remark
2 SVER ? Software version query xxxxxxxxx Returns version number.
2 INNM ?
Input terminal name
query
11 / COMPUTER
31 / HDMI1
32 / HDMI2
33 / HDMI3
34 / DIGITAL LINK
Returns input terminal name.
2 IRES ?
Input signal resolution
query
AAAAxBBBB
AAAA: Horizontal resolution
BBBB: Vertical resolution
2 RRES ?
Recommended
resolution query
1920x1200 ―
2 FILT ? Filter runtime inquiry xxxxx Returns the runtime of the lter.
2 RFIL ?
Filter replacement model
number inquiry
ET-RFM100 Returns the lter replacement model number.
2
FREZ Freeze control
0
1
Freeze function cancel
Freeze function (stop)
FREZ ? Freeze status query
2 LKUP Link up notication xx:xx:xx:xx:xx:xx
Noties the MAC address when the PJLink communication
becomes possible.
2 SRCH Projector search ACKN=xx:xx:xx:xx:xx:xx
The projector connected to the same network that can
communicate with PJLink will respond with its MAC address.
PJLink security authentication
A PJLink password for security authentication is required for PJLink command communication.
The PJLink password can be set from the [NETWORK] menu → [PJLink] → [PJLink PASSWORD] (
x
page 140)
or from the [Set up password] page (
x
page 159) of the web control screen.
When using the PJLink commands without security authentication, set the PJLink password to blank. The factory
default setting of PJLink password is blank.
f
For specications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/
Using Art-Net function
Since the network function of the projector supports the Art-Net function, you can control the projector settings
with the DMX controller and application software using the Art-Net protocol.
Note
f
Setting the password of the administrator account (
x
page 137) is required for using the Art-Net function of the projector.
Channel denition
The following table lists the channel denitions used for controlling the projector with the Art-Net function.
Channel settings can be switched using the [NETWORK] menu
→
[Art-Net]
→
[Art-Net CHANNEL SETTING]
(
x
page 142).
The control details assigned to each channel are listed in the following table.
f
Channel assignment for [USER] is in factory default setting. Assignment can be changed.
Channel
Control details
[2] [USER] [1]
CHANNEL1 LIGHT OUTPUT LIGHT OUTPUT SHUTTER
CHANNEL2 INPUT SELECT INPUT SELECT INPUT SELECT
CHANNEL3 LENS POSITION LENS POSITION LENS FUNCTION SELECT
CHANNEL4 LENS H SHIFT LENS H SHIFT LENS CONTROL
CHANNEL5 LENS V SHIFT LENS V SHIFT POWER
CHANNEL6 LENS FOCUS LENS FOCUS LIGHT OUTPUT
CHANNEL7 LENS ZOOM LENS ZOOM ENABLE / DISABLE
CHANNEL8 POWER POWER FADE-IN
CHANNEL9 SCREEN ADJUSTMENT SCREEN ADJUSTMENT FADE-OUT