Panasonic PT-MZ880

Chapter 7 Appendix — Technical information
ENGLISH - 191
Client
Server
First session
Second session
Connection query
Sending key
Send rst command
Respond rst command
Cut off
Connection query
Sending key
Send second command
Respond second command
Cut off
<SERIAL/MULTI SYNC IN> / <MULTI SYNC OUT> terminals
The <SERIAL/MULTI SYNC IN> terminal of the projector conforms with RS-232C so that the projector can be
connected to and controlled from a computer.
A combined screen with a balanced contrast can be displayed by linking multiple projectors using the <SERIAL/
MULTI SYNC IN> terminal and the <MULTI SYNC OUT> terminal, and sharing the brightness level of the video
signal input to each projector when structuring a multi-display screen by combining the projected images from
multiple projectors. It is also possible to synchronize the shutter operation of the specied projector to other
projectors.
For the connection method of the projectors when using the contrast synchronization function or the shutter
synchronization function, refer to “Connecting example when using the contrast synchronization function/shutter
synchronization function” (
x
page 46).
Connection for RS-232C communication
When connecting directly
Projector connecting terminals
Computer
D-Sub 9p (male)
Communication cable (straight)
D-Sub 9p (female)
When connecting using DIGITAL LINK compatible device
DIGITAL LINK compatible device
Computer
D-Sub 9p (female)
Projector connecting terminals
DIGITAL LINK DIGITAL LINK
D-Sub 9p (male)
Communication cable (straight)
LAN cable (straight)