Chapter 4 Settings — [POSITION] menu
ENGLISH - 113
[CONVERGENCE]
Correct the position shift of the three primary colors of red, green, and blue in the projected image.
1) Press as to select [CONVERGENCE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Disables the convergence function.
[ON] Enables the convergence function.
f Proceed to Step 3) when [ON] is selected.
3) Press the <ENTER> button.
f The [CONVERGENCE] screen is displayed.
4) Press as to select the color to adjust, and press the <ENTER> button.
5) Press as to select the position on the projected image to adjust and adjustment direction, and
press qw to adjust.
Note
f The picture quality may degrade when the convergence function is used.
f It is recommended to perform the adjustment with the convergence function after 30 minutes have elapsed with the focus test pattern
displayed. For details of the test pattern, refer to “[TEST PATTERN] menu” (x page 193).
To Next Page
Loading...
