Panasonic PT-RQ22KD

Chapter 4 Settings — [ADVANCED MENU] menu
ENGLISH - 119
5) Press as to select [FILM DETECTION].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Disables the lm detection function.
[ON]
Enables the lm detection function. The video resolution is enhanced for the contents that telecine is
performed on the input signal.
Note
f The video resolution is not changed even if [FILM DETECTION] is set to [ON] for the contents that the telecine is not performed on the input
signal.
The contents which telecine is performed is the contents that the lm image is converted to the video image.
f [FILM DETECTION] cannot be set when a signal for the content with vertical scanning frequency of 30 Hz, 25 Hz, or 24 Hz is input.
[QUAD PIXEL DRIVE]
Set the enable/disable of the QUAD PIXEL DRIVE function to enhance the resolution of the projected image.
1) Press as to select [QUAD PIXEL DRIVE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON] Enables the QUAD PIXEL DRIVE function.
[OFF] Disables the QUAD PIXEL DRIVE function.
Note
f [QUAD PIXEL DRIVE] is xed to [ON] in the following cases.
g When the [POSITION] menu → [GEOMETRY] is set to anything other than [OFF]
g When [CUSTOM MASKING] in [BLANKING] is set to anything other than [OFF] ([PC-1], [PC-2], [PC-3])
To use the [CUSTOM MASKING] function, the optional Upgrade Kit (Model No.: ET-UK20) is required. To purchase the product, consult
your dealer.
g When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)], and the following image in simultaneous
format is displayed
3840 x 2160/60, 3840 x 2160/50, 4096 x 2160/60, 4096 x 2160/50
g While in the four-screen display mode
The four-screen display mode can be canceled by setting the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] to [OFF].
(x page 191)
f [QUAD PIXEL DRIVE] is xed to [OFF] in the following cases.
g When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)] or [AUTO(x4-speed)], and the following
image in simultaneous format is displayed
1080/60p, 1080/50p, 1366 x 768/50, 1366 x 768/60, 1400 x 1050/50, 1400 x 1050/60, 1920 x 1080/50, 1920 x 1080/60, 1920 x 1200/50,
1920 x 1200/60RB
g When the focus test pattern is displayed using the [TEST PATTERN] menu
To enable the QUAD PIXEL DRIVE function while displaying the focus test pattern, set [QUAD PIXEL DRIVE] to [ON] again while
displaying the focus pattern.
f [QUAD PIXEL DRIVE] is xed to [ON] when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)] and
displaying the following image in simultaneous format while [QUAD PIXEL DRIVE] is set to [OFF].
3840 x 2160/60, 3840 x 2160/50, 4096 x 2160/60, 4096 x 2160/50
f [QUAD PIXEL DRIVE] is xed to [OFF] when the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)] or
[AUTO(x4-speed)] and displaying the following image in simultaneous format while [QUAD PIXEL DRIVE] is set to [ON].
1080/60p, 1080/50p, 1366 x 768/50, 1366 x 768/60, 1400 x 1050/50, 1400 x 1050/60, 1920 x 1080/50, 1920 x 1080/60, 1920 x 1200/50,
1920 x 1200/60RB
f [QUAD PIXEL DRIVE] is xed to [ON] when the [MULTI DISPLAY] menu → [MULTI DISPLAY MODE] is set to anything other than [OFF]
and displaying the four-screen display while [QUAD PIXEL DRIVE] is set to [OFF].
f When [QUAD PIXEL DRIVE] is set to [ON], the [DISPLAY OPTION] menu → [ON-SCREEN DISPLAY] → [OSD SIZE] cannot be set.