18 - ENGLISH
Features of the Projector
High luminance and high contrast
▶ In addition to high luminance of 20 000 lm
and high contrast of 20 000:1
*1
, the
HDR (High Dynamic Range) standard is
also supported, allowing the high-contrast
image content to be reproduced as a
projected image.
*1 When [DYNAMIC CONTRAST] is set to [3]
Easy and highly exible setup
▶ Not only the DIGITAL LINK support,
various interfaces such as 12G-SDI
signal
*1
and HDMI signal
*1
are supported
to exibly and easily support the customer
systems. Also, supporting of the Art-Net,
etc., gives superior compatibility with the
devices other than projectors, allowing
advanced rendition in wide range of usage.
*1 Installation of the optional Interface Board is required.
Long life and high reliability
▶ In addition to adopting the solid-state light
source with long life, it has enhanced the
dust resistance property of the optical unit
that is sensitive to dust. By eliminating the
lter, the long-period maintenance cost is
reduced drastically.
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 40)
2. Attach the projection lens
(optional).
(x page 54)
3. Connect with external devices.
(x page 57)
4. Connect the power cord.
(x page 67)
5. Switch on the projector.
(x page 69)
6. Make initial settings.
(x page 70)
Set the lens type.
(x page 83)
Execute the lens calibration.
(x page 84)
f Take this step when you switch on the
power for the rst time after purchasing the
projector.
7. Select the input signal.
(x page 78)
8. Adjust the image.
(x page 80)
To Next Page
Loading...
