Panasonic PT-RQ22KD

Chapter 7 Appendix — Technical information
ENGLISH - 243
r INPUT SELECT (when [Art-Net CHANNEL SETTING] is set to anything other than [1])
Performance Parameter Default value
No operation 0-39
0
DIGITAL LINK 40-47
SDI1 48-55
SDI2 56-63
SDI3 64-71
SDI4 72-79
SLOT1-1
*1
80-87
SLOT1-2
*1
88-95
SLOT2-3
*2
96-103
SLOT2-4
*2
104-111
No operation 112-119
MULTI DISPLAY OFF 120-127
Execute MULTI DISPLAY, USER1 128-135
Execute MULTI DISPLAY, USER2 136-143
Execute MULTI DISPLAY, USER3 144-151
SLOT1-1
*3
152-159
SLOT1-2
*3
160-167
SLOT1-3
*3
168-175
SLOT1-4
*3
176-183
SLOT2-1
*4
184-191
SLOT2-2
*4
192-199
SLOT2-3
*4
200-207
SLOT2-4
*4
208-215
No operation 216-255
*1 When the Interface Board equipped with two inputs is installed in <SLOT 1>, the input is switched to the specied input of the Interface Board.
*2 When the Interface Board equipped with two inputs is installed in <SLOT 2>, the input is switched to the specied input of the Interface Board.
*3 When the Interface Board equipped with four inputs is installed in <SLOT 1>, the input is switched to the specied input of the Interface Board.
*4 When the Interface Board equipped with four inputs is installed in <SLOT 2>, the input is switched to the specied input of the Interface Board.
r LENS FUNCTION SELECT
Operate together with LENS CONTROL.
Performance Parameter Default value
No operation 0-15
0
LENS H SHIFT 16-31
LENS V SHIFT 32-47
LENS FOCUS 48-63
LENS ZOOM 64-79
Move to the home position 80-95
Load LENS MEMORY 1 96-111
Load LENS MEMORY 2 112-127
Load LENS MEMORY 3 128-143
No operation 144-255
r LENS CONTROL
Operate together with LENS FUNCTION SELECT.
Performance Parameter Default value
Lens adjustment
(
- ) High speed 0-31
100
(
- ) Low speed 32-63
(
- ) Fine adjustment 64-95
Operation stop 96-127
Lens adjustment
(+) Fine adjustment 128-159
(+) Low speed 160-191
(+) High speed 192-223
Execute command action 224-255