Panasonic PT-RQ35K

Chapter 4 Settings — Menu navigation
ENGLISH - 103
Sub-menu item Factory default [SIMPLE] mode Page
[EDGE BLENDING] [OFF] ― 123
[FRAME RESPONSE] [NORMAL] ― 127
[FRAME DELAY] [+0.00ms] ― 127
[QUAD PIXEL DRIVE] [ON] ― 127
[RASTER POSITION] ― ― 128
*1 Depends on the signal input.
[DISPLAY LANGUAGE]
Details (x page 129)
[DISPLAY OPTION]
Sub-menu item Factory default [SIMPLE] mode Page
[COLOR MATCHING] [OFF]
l
130
[SCREEN SETTING] ―
l
132
[AUTO SIGNAL] [OFF] ― 133
[AUTO SETUP] ― ― 133
[BACKUP INPUT SETTING] ― ― 134
[SIMUL INPUT SETTING]
*1
― ― 135
[HDMI IN] ― ― 136
[DIGITAL LINK IN] ― ― 138
[SLOT IN] ― ― 141
[ON-SCREEN DISPLAY] ―
l
156
[MENU MODE] [NORMAL]
l
158
[BACK COLOR] [BLUE] ― 158
[STARTUP LOGO] [DEFAULT LOGO]
l
159
[UNIFORMITY] ― ― 159
[SHUTTER SETTING] ― ― 160
[FREEZE] ― ― 163
[WAVEFORM MONITOR] [OFF] ― 163
[CUT OFF] ― ― 164
*1 [SIMUL INPUT SETTING] can be set when the main version of the rmware is 1.07 or higher. [SIMUL INPUT SETTING] will be able to be set by
updating the rmware if the main version is lower than 1.07.
Check the Panasonic website (https://panasonic.net/cns/projector/pass/) for availability of the rmware that can be updated. For details on how to
update the rmware, refer to “Updating the rmware” (x page 277).
[PROJECTOR SETUP]
Sub-menu item Factory default [SIMPLE] mode Page
[PROJECTOR ID] [ALL]
l
165
[PROJECTION METHOD] ―
l
165
[LENS] ―
l
166
[OPERATION SETTING] ―
l
178
[LIGHT OUTPUT] [100.0%]
l
181
[BRIGHTNESS CONTROL] ― ― 181
[NO SIGNAL SETTING] ― ― 185
[INITIAL STARTUP] [LAST MEMORY] ― 188
[STARTUP INPUT SELECT] [LAST USED] ― 189
[DATE AND TIME] ―
l
189
[SCHEDULE] [OFF] ― 190
[MULTI PROJECTOR SYNC] ― ― 193
[RS-232C] ―
l
194
[REMOTE2 MODE] [DEFAULT] ― 196
[FUNCTION BUTTON] ― ― 196