Chapter 4 Settings — [SECURITY] menu
ENGLISH - 213
r [SLOT2 BUTTON]
[HDMI3 [SLOT2]] and [HDMI4 [SLOT2]] can be selected when the optional Interface Board for HDMI 2 input
(Model No.: ET-MDNHM10) is installed in <SLOT 2>.
[DisplayPort3 [SLOT2]] and [DisplayPort4 [SLOT2]] can be selected when the optional Interface Board for
DisplayPort 2 input (Model No.: ET-MDNDP10) is installed in <SLOT 2>.
[DVI-D3 [SLOT2]] and [DVI-D4 [SLOT2]] can be selected when the optional Interface Board for DVI-D 2 input
(Model No.: ET-MDNDV10) is installed in <SLOT 2>.
The items from [SDI1 [SLOT2]] to [SDI4 [SLOT2]] can be selected when the optional Interface Board for 12G-SDI
(Model No.: ET-MDN12G10) is installed in <SLOT 2>.
[SDI OPT1 [SLOT2]] and [SDI OPT2 [SLOT2]] can be selected when the optional Interface Board for 12G-SDI
Optical (Model No.: ET-MDNFB10) is installed in <SLOT 2>.
[TOGGLE]
Switches the input of the optional Interface Board installed in <SLOT 2> in turn when the button is
operated.
[HDMI3 [SLOT2]] Fixes to selection operation of the HDMI3 input of the Interface Board.
[HDMI4 [SLOT2]] Fixes to selection operation of the HDMI4 input of the Interface Board.
[DisplayPort3 [SLOT2]] Fixes to selection operation of the DisplayPort3 input of the Interface Board.
[DisplayPort4 [SLOT2]] Fixes to selection operation of the DisplayPort4 input of the Interface Board.
[DVI-D3 [SLOT2]] Fixes to selection operation of the DVI-D3 input of the Interface Board.
[DVI-D4 [SLOT2]] Fixes to selection operation of the DVI-D4 input of the Interface Board.
[SDI1 [SLOT2]] Fixes to selection operation of the SDI1 input of the Interface Board.
[SDI2 [SLOT2]] Fixes to selection operation of the SDI2 input of the Interface Board.
[SDI3 [SLOT2]] Fixes to selection operation of the SDI3 input of the Interface Board.
[SDI4 [SLOT2]] Fixes to selection operation of the SDI4 input of the Interface Board.
[SDI OPT1 [SLOT2]] Fixes to selection operation of the SDI OPT1 input of the Interface Board.
[SDI OPT2 [SLOT2]] Fixes to selection operation of the SDI OPT2 input of the Interface Board.
[DISABLE] Disables button operations.
[CONTROL DEVICE PASSWORD CHANGE]
The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
4) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
f The initial password is “AAAA” by the factory default setting, or after initialized by one of the following methods.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
f Change the password periodically that is hard to guess.
f To initialize your password, consult your distributor.
To Next Page
Loading...
