Panasonic PT-RZ470 Series

2.10.2. Greasing for Heat-pipe unit
< Caution for LD unit >
 Don't put a LD unit on the desk otherwise LD lenses may be damaged.
Please prepare some pedestals and use these as shown below.
 Don't touch the LD lenses on the LD unit.
 Don't touch the terminal of flexible cable on the LD unit.
1. Set the LD unit on a Pedestal.
2. Set the Heat-pipe unit on the LD unit.
3. Tighten 4 screws A (Original silver screws with washers) by torque driver.
LD lenses
Don’t touch the LD lenses.
Don’t touch the terminal
Don’t put the LD unit on the desk
LD unit
Pedestal
EdgeEdge
LD unit
Pedestal
Heat-pipe unit
Screw A .
Tightening torque
 Screw A : 7010 cNm
DIS-17