Mode
Display resolution
(dots)
Scanning frequency
Dot clock
frequency
(MHz)
Format
PnP*
1
H (kHz) V (Hz)
COMPUTER1/
COMPUTER2
HDMI 1/2
1280 x 768
1 280 x 768 60.3 74.9 102.3 R/H ― ―
1 280 x 768 68.6 84.8 117.5 R/H ― ―
1280 x 800
1 280 x 800 62.8 74.9 106.5 R/H ― ―
1 280 x 800
71.6 84.9 122.5 R/H ― ―
1 280 x 800
41.3 50.0 68.0 R/H ― ―
1 280 x 800
49.7 59.8 83.5 R/H
l
*5
l
*5
1280 x 960 1 280 x 960 60.0 60.0 108.0 R/H ― ―
SXGA
1 280 x 1 024
64.0 60.0 108.0 R/H ― ―
1 280 x 1 024
80.0 75.0 135.0 R/H ― ―
1 280 x 1 024
91.1 85.0 157.5 R/H ― ―
1366 x 768
1 366 x 768 39.6 49.9 69.0 R/H ― ―
1 366 x 768 47.7 59.8 85.5 R/H ― ―
SXGA+
1 400 x 1 050
65.3 60.0 121.8 R/H ― ―
1 400 x 1 050
65.2 60.0 122.6 R/H ― ―
1 400 x 1 050
82.3 74.9 156.0 R/H ― ―
1440 x 900
1 440 x 900
55.9 59.9 106.5 R/H ― ―
1600 x 900
1 600 x 900 46.3 50.0 97.0 R/H ― ―
1 600 x 900 55.9 60.0 119.0 R/H ― ―
UXGA
1 600 x 1 200
75.0 60.0 162.0 R/H
l l
1680 x 1050
1 680 x 1 050
54.1 50.0 119.5 R/H ― ―
1 680 x 1 050
65.3 60.0 146.3 R/H ― ―
1920 x 1080
1 920 x 1 080
55.6 49.9 141.5 R/H ― ―
1 920 x 1 080
*4
66.6 59.9 138.5 R/H ― ―
WUXGA
1 920 x 1 200
61.8 49.9 158.3 R/H ― ―
1 920 x 1 200
*4
74.0 60.0 154.0 R/H ― ―
*1 Where marked “l” signals indicates in Plug and Play is compatible with EDID of projector. Unmarked signals in Plug and Play may also
be compliant if input terminals are written in the format list. Where Plug and Play is unmarked and nothing is written in the format list,
difculties in projecting image may occur even when computer and projector appear to have same resolution.
*2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.
*4 VESA CVT-RB (Reduced Blanking)-compliant.
*5 Only for PT-VW360
Note
f The number of display dots is 1 280 x 800 for the PT-VW360 and 1 024 x 768 for the PT-VX430.
A signal with a different resolution will be projected after converting the resolution to match the projector display.
f “i” added to the resolution value indicates an interlaced signal.
f When interlaced signals are connected, icker may occur on the projected image.
ENGLISH - 129
Chapter 7 Appendix - Technical Information
To Next Page
Loading...
