rControl panel and indicators
1
2
3
4
5
6
7
8
9
10
1 Power <v/b> button (v standby / b power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the luminous lamp.
4 Warning indicator <WARNING>
Indicates the abnormal conditions of the projector.
5 Ambient Luminance sensor
6 <MENU> button
Displays or hides the main menu. (x page 52)
When the sub menu is displayed, pressing it will return to the
previous screen.
7 <ENTER> button
Determines and executes an item in the menu screen.
8 asqw buttons
Selects an item in the menu screen, changes the setting, and
adjusts the level.
Also used to enter a password in the [SECURITY] menu or enter
characters.
9 <INPUT SELECT> button
Selects the input signal for projection. (x page 43)
Automatically adjusts the screen display position when projecting
the image. (x page 47)
ENGLISH - 25
Chapter 1 Preparation - About your projector
To Next Page
Loading...
