Panasonic PT-VW360

3) Press qw to switch the item.
f The items will switch each time you press the button.
f Normally it is set to [AUTO]. If it cannot project properly with [AUTO], set it to [RGB], [YC
B
C
R
] or [YP
B
P
R
]
according to the input signal.
[AUTO]
[RGB], [YP
B
P
R
] or [YC
B
C
R
] is selected automatically.
[RGB]
Select it for RGB signal input.
[YP
B
P
R
] Select it for YP
B
P
R
signal input.
[YC
B
C
R
] Select it for YC
B
C
R
signal input.
When COMPUTER 1 / COMPUTER 2 input is selected
f For 525i (480i), 625i (576i), 525p (480p) and 625p (576p) input
Select [AUTO], [RGB] or [YC
B
C
R
].
f For other movie-based signal input
Select [AUTO], [RGB] or [YP
B
P
R
].
When HDMI 1 / HDMI 2 input is selected
f For 525p (480p) and 625p (576p) input
Select [AUTO], [RGB] or [YC
B
C
R
].
f For other movie-based signal input
Select [AUTO], [RGB] or [YP
B
P
R
].
Note
f Refer to “List of compatible signals” (x page 128) for the signal details.
f The signal selection may not function properly depending on connected devices.
60 - ENGLISH
Chapter 4 Settings - [PICTURE] menu