Adjusting adjustable feet
By pressing the adjustable feet lock with your nger, the adjustable feet lock is released and becomes free. It will
be locked when you release the nger. Lift the front side of the projector while pressing the adjustable feet lock
with your nger, and release your nger until the projection position is aligned. If ne adjustment of the projection
position is necessary, adjust the adjustable feet by turning them. Turn the adjustable feet counterclockwise as
shown in the gure to extend them. Also, turning them clockwise will return to the original status.
Feet lock latches
Adjustable range
Adjustable feet : 43 mm (1-11/16")
Attention
f Heated air is expelled from the air exhaust port. Do not touch the air exhaust port directly when adjusting the adjustable feet while using the
projector. (x page 21)
Note
f When turning the adjustable feet clockwise, a click sound is heard when the adjustable feet changes to its minimum length.
42 - ENGLISH
Chapter 3 Basic Operations - Projecting
To Next Page
Loading...
