5-2-1-11
5
E12 Automatic Address Setting Start is Prohibited While Auto-address Setting in Progress.
Error Detection Method
Error Diagnosis
It is judged an error if a command to start auto address setting comes from another controller during auto address setting.
1.
2.
1
This occurs in a system that has more than one outdoor unit and operating lines among the indoor/outdoor units
(networked wiring), when an instruction to start auto address setting is given from another controller during the auto
address setting process.
•
When one controller in a networked system is running auto address setting, it is not possible
to start auto address setting from another controller.
Wait until the auto address setting in progress finishes.
1-1
Auto
Address
SM830283-00_欧州向け R32シングル36-71形TD&SM.indb 11 2020/01/29 21:17:46
To Next Page
Loading...
