Error
Code
Diagnosis
Contents
Description of error Automatic FL Display Remarks
F27 SLIDE
OPERATION
Abnormal.
During vertical
operation, if failsafe
timer is finished and
switch no change or
switch target
condition was not
achieve, this error
shall be memorized.
Next time
mechanism
operates, it shall do
coldstart.Error No.
shall be clear by
force orcoldstart.
For CD unit (For Traverse).
Press [
on main unit for next error.
F17 DOWN SW
Abnormal.
During vertical
operation going to
the bottom position,
if failsafe timer is
finished and switch
no change or switch
target condition
was not achieve,
this error shall be
memorized. The
Next time
mechanism
operates, it shall do
mechanism
initialization.Error
No. shall be clear by
force or coldstart.
For CD unit (For Traverse).
Press [
on main unit for next error.
F22 LOADING
MOTOR/MECHA
Abnormal.
During mecha
initialization,
Loading mode
mechanism
abnormal, normal
operation cannot be
achieve.The next
time mechanism
operates, it shall do
mechanism
initialization.Error
No. shall be clear by
fore or coldstart.
For CD unit (For Traverse).
Press [
on main unit for next error.
31
To Next Page
Loading...
