Panasonic SA-PM53E - Cr16 Mechanism Assembly Procedure

9.26. CR16 MECHANISM ASSEMBLY PROCEDURE
The following specified greases and/or oil must be applied when some specific parts are changed.
1. Floil grease (VFK1298) : The floil grease must be applied to tray, tray
(L) and tray (R).
2. Hanarl oil (VFK1700) : The hanarl oil must be applied to any parts with
grease other than the said parts.
- Follow the (Step 1) - (Step 6) of Item 9.4.
- Follow the (Step 1) - (Step 2) of Item 9.5.
- Follow the (Step 1) - (Step 4) of Item 9.7.
- Follow the (Step 1) - (Step 2) of Item 9.11.
- Follow the (Step 1) - (Step 5) of Item 9.14.
- Follow the (Step 1) - (Step 10) of Item 9.25.2.
- Follow the (Step 1) - (Step 4) of Item 9.25.3.
- Follow the (Step 1) - (Step 22) of Item 9.25.4.
77