Panasonic SC-CH52 - Page 12

Listening to Compact Disc
To change discs during play
While a disc is playing, you can change disc.
1. Press & OPEN/CLOSE during playing.
The loading drawer will open at half position.
2. Change the discs.
3. Press 4 OPEN/CLOSE again to close the foading drawer.
® Do not insert another disc onto tray placed at @). Although the
tray is partially showing, its disc is in the play position.
® To open fully, follow the procedure below.
1. Press D.
2. Press & OPEN/CLOSE to close the loading drawer.
3. Press & OPEN/CLOSE again to open the drawer.
For your reference:
If you play a disc with the loading drawer open, the changer will
automatically stop when the last track on the current disc finishes
playing.
To select the desired disc
Press DISC 1, DISC 2 or DISC 3 to select the disc
which you want to play.
The play will automatically start from the first track of the disc you
select.
Repeat function
This function repeats the play of ail tracks on the loaded disc.
Press REPEAT before or during play.
REPEAT oO
e2> . &
(200 goog =
To repeat the same track over and over/
To repeat the programmed tracks
1. Select the desired track using the program play procedure on
page 13.
2. Press REPEAT to display “ CD”.
3. Press >,
-SKIP/-SEARCH
Kid/<<d D/P
REPEAT
Skip function
Press either é<d/<4<@ of >> /P1 until you reach
the desired track.
bP PB: To skip forward
You can skip as many tracks as the number of times you press the
button.
bid /<4: To skip backward
You can skip to the beginning of the track being played. If you
press this button again quickly, you can skip to the beginning of the
previous track.
Note that in a backward skip, the current track is included in the
count.
For your reference:
In program play mode, you can skip only the programmed tracks.
(See page 13.)
In random play mode, you cannot skip to the previous track.
(See page 14.)
Search function
You can rapidly search forward or backward on the disc for specific
sections.
While in play mode, press and hold either @</<#
or >> /PPI. Release the button when you have
reached the desired point.
> PI: To search forward
hl “4: To search backward
For your reference:
During program play and random play, search will take place within
the track being played.