50
VQT1P61
Recording
You can record still pictures using the
timer.
¬Rotate the mode dial to select
.
1 Press the cursor button in the
centre. Then press the button
down to display the icon
shown in the illustration.
2 Press the cursor button left to
select [Ø].
3 Press the record button.
After the [Ø] display flashes for
approx. 10 seconds, a still picture
will be recorded.
≥ After recording, the self-timer is
cancelled.
To stop the timer midway through
Press the MENU button. (The self-timer
setting is cancelled.)
≥ If you turn off the power, the self-timer
standby mode is cancelled.
You can check if the image is level while
recording by using the lines displayed on
the screen.
¬Rotate the mode dial to select
or .
Press the MENU button, then
select [BASIC] # [GUIDE LINES]
# [ON] and then press the cursor
button in the centre.
To cancel the Recording
guideline function
Press the MENU button, then select
[BASIC] # [GUIDE LINES] # [OFF] and
then press the cursor button in the
centre.
≥ The guidelines do not appear on the
images actually recorded.
Self-timer recording
This is for recording shots of
yourself as well.
1/2
NEXT
1/2
NEXT
1/2
NEXT
1/2
NEXT
Recording guideline
function
Checking if the image is level.
SDR-S9-VQT1P61_eng.book 50 ページ 2007年12月18日 火曜日 午後3時59分