90
VQT1P61
With a computer
1 Double click the icon in
task tray displayed on the
computer screen.
Hardware disconnect dialog
appears.
≥ Depending on your computer’s
settings, this icon may not be
displayed.
2 Select [USB Mass Storage
Device] and click [Stop].
3 Verify [MATSHITA SD Video
Camera USB Device] is
selected and click [OK].
Click [Close] and you can safely
disconnect the cable.
≥ If you disconnect the USB cable while
the card access lamp is on or while
appears on the LCD monitor, it may
damage the data.
Follow the steps below to uninstall the
software if it is no longer required.
1 Select [start] # ([Settings] #)
[Control Panel] # [Add or
Remove Programs
(Applications)] or [Uninstall a
program].
2 Select
[MotionSD STUDIO 1.3E], then
click [Change/Remove]
([Change or Remove] or [Add/
Remove] or [Uninstall]).
≥ Proceed with the uninstallation by
following the on-screen
instructions.
≥ After uninstalling the software, be
sure to reboot the computer.
To disconnect the USB
cable safely
Software uninstallation
SDR-S9-VQT1P61_eng.book 90 ページ ２００７年１２月１８日 火曜日 午後３時５９分
To Next Page
Loading...
