Panasonic SDR-S9 - Page 56

56
VQT1P61
Recording
3 Press the cursor button left or
right to select the white
balance mode.
To restore to the automatic
adjustment
Set the white balance mode to [ ].
≥ You can also restore the auto focusing
by pressing the AUTO button.
1 Select [ ] and then fill the
screen with a white subject.
2 Press the cursor button up to
select [ ].
When the [ ] display changes from
flashing to on, setting is complete.
≥ When the [ ] display continues
flashing, the white balance cannot be
set because the place is dark etc. In
this case, use the automatic white
balance.
[]
Auto white balance adjustment
[]
Indoor mode (for recording
under incandescent lamps)
≥ Incandescent lights, halogen
lamps
[]
Outdoor mode
≥ Outdoors under a clear sky
[]
Manual adjustment mode
≥ Mercury-vapor lamps, sodium
lamps, some fluorescent lights
≥ Lights used for wedding
receptions at hotels, stage
spotlights in theaters
≥ Sunrise, sunset, etc.
MNL
BACK
BACK
BACK
AWB
AWB
To set the white balance
manually
MNL
BACK
BACK
BACK
BACK
MNL
BACK
BACK
BACK
SDR-S9-VQT1P61_eng.book 56 ページ ２００７年１２月１８日 火曜日 午後３時５９分