71
VQT1P61
With other products
∫ If the image or audio from
this unit is not output on
the TV
≥ Check that the plugs are inserted as
far as they go.
≥ Check the connected terminal.
≥ Check the TV’s input setting (input
switch). (For more information,
please read the operating
instructions for the TV.)
≥ If you have a TV with an SD card slot,
the motion pictures and still pictures
recorded on the SD card maybe
played back on the TV. (Refer to the
operating instructions of the TV for
details about TV compatibility.)
≥ If the images are not displayed
correctly on a wide-screen TV, adjust
the aspect setting on the TV. (Refer to
the operating instructions of the TV for
details.) If the pictures are displayed
squeezed horizontally on a regular TV
(4:3), change the [TV ASPECT] setting
on this unit.
∫ To watch images with a
16:9 aspect ratio on a
regular TV (4:3)
When playing back motion pictures
recorded with a 16:9 aspect ratio
([REC ASPECT] was set to [16:9]) on a
TV with a 4:3 aspect ratio, the images
may be squeezed horizontally. In this
case, change the menu setting to play
back the pictures in the original aspect
ratio. (Depending on the TV setting, the
pictures may not be displayed correctly.
For more information, please read the
operating instructions of your TV.)
Press the MENU button, then
select [SETUP] # [TV ASPECT]
# [4:3] and then press the cursor
button in the centre.
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
≥ This function’s default setting is [16:9].
[TV ASPECT] setting
[16:9] [4:3]
SDR-S9-VQT1P61_eng.book 71 ページ ２００７年１２月１８日 火曜日 午後３時５９分
To Next Page
Loading...
