Note
f The SSID, IP address (wireless) and QR code are not displayed in following cases.
g When the optional wireless module (Model No.: AJ-WM50) is not attached to the <USB (VIEWER/WIRELESS/DC OUT)> terminal
g When the web control → [Network cong] → [WIRELESS LAN] is set to [DISABLE] (x page 131)
r Operation of a smartphone
1) Start application software of the camera supporting reading of a QR code.
2) Read the QR code displayed in the OSD or the network input idle screen with the camera.
3) Tap the notification displayed on the smartphone screen.
f Tap “Join” or “Connect” if a message to conrm the connection is displayed.
f The smartphone will be connected to the projector via wireless LAN.
ENGLISH - 123
Chapter 5 Operation of Function - Network connection
To Next Page
Loading...
