About your projector
Remote control
r For PT-VMZ71, PT-VMZ61, PT-VMZ51, PT-VMW61, PT-VMW51
2
1
3
5
4 4
6
7
11
10
24
25
17
16
18
21
20
19
22
23
8
9
15
14
13
12
Front
Top
Bottom
1 Power <v/b> button
(v: Standby, b: Power on)
Sets the projector to the state where the projector is switched
off (standby mode). Also starts projection when the power is
switched off (standby mode).
2 Remote control indicator
Blinks if any button in the remote control is pressed.
3 <MENU> button/<RETURN> button / <ENTER> button/
asqw buttons
Used to navigate through the menu screen. (x page 65)
asqw buttons are also used to enter the password in
[SECURITY] or enter characters.
4 <VOL
-
> button/<VOL+> button
Adjusts the volume of the built-in speaker or audio output.
(x page 57)
5 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(x page 66)
6 Input selection buttons (<HDMI1>, <HDMI2>, <DIGITAL
LINK>, <COMPUTER1/2>, <NETWORK/USB>)
Switches the input signal to project. (x page 53)
7 Number (<0> ~ <9>) buttons
Used for entering a password or an ID number in a multiple
projector environment.
8 <ON SCREEN> button
Switches on (display)/off (hide) the on-screen display function.
(x page 58)
9 <ID ALL> button
Used to simultaneously control all the projectors with a single
remote control in a multi-projector environment. (x page 63)
Automatically adjusts the image display position while the image
is projected. (x page 58)
11 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
(x page 61)
12 <CEC> button
Displays the HDMI-CEC operation screen. (x page 97)
13 <TEST PATTERN> button
Displays the test pattern. (x page 62)
14 <ID SET> button
Sets the ID number of the remote control in a multi-projector
environment. (x page 63)
15 <ECO> button
Displays the setting screen relating to ECO management.
(x page 62)
16 <SCREEN ADJ> button
You can extend the projection distance via the Digital Zoom
Extender function or correct various types of distortion in a
projected image. (x page 59)
17 <FREEZE> button
Used when pausing the image and turning off the audio.
(x page 58)
Operates the presentation timer function. (x page 61)
19 <D.ZOOM +> button / <D.ZOOM -> button
Zoom in and out the images. (x page 59)
20 <SHUTTER> button
Used to turn off the audio and video temporarily. (x page 57)
21 <MUTE> button
Used to temporarily mute the projector. (x page 57)
Switches the aspect ratio of the image. (x page 61)
23 <STATUS> button
Displays the projector information. (x page 62)
24 Remote control signal transmitter
25 Not available with this projector
ENGLISH - 27
Chapter 1 Preparation - About your projector
To Next Page
Loading...
