Using HDMI-CEC function
HDMI-CEC function allows the basic operation of CEC-compatible device with the projector remote control or the
link control between the projector and CEC-compatible device.
Connecting a CEC-compatible device
Connect a CEC-compatible device to the <HDMI IN 1> terminal or <HDMI IN 2> terminal.
CEC-compatible device
Blu-ray disc player (example)
CEC-compatible device
Blu-ray disc player (example)
HDMI cable
(commercially available)
Repeater
Connection example with CEC-compatible device
Setting the projector and CEC-compatible device
Before using the HDMI-CEC function, you need to congure the settings on the projector and the CEC-compatible
device.
f CEC-compatible device: enable the HDMI-CEC function.
f Projector: Set the [PROJECTOR SETUP] menu → [HDMI CEC] to [ON]. (x page 97)
Note
f After switching on the CEC-compatible device, switch on the projector and select HDMI1 input or HDMI2 input, then check that the image
from the CEC-compatible device is projected correctly.
Operating the CEC-compatible device with the projector remote control
You can operate the device using the projector remote control by calling up the operation menu of the CEC-
compatible device from the HDMI-CEC operation screen. Use the number buttons (<2>, <5>, <8>) on the remote
control to select the operation item on the HDMI-CEC operation screen.
About the HDMI-CEC operation screen, refer to “Operating a CEC-compatible device” (x page 97).
1
2
3
4
(Device name)
2 MENU
5 POWER
8 RETURN
HDMI-CEC operation screen
1 Displays the device name to be operated.
2 [MENU]
Call up the operation menu of the CEC-compatible device.
3 [POWER]
Switch on/off the device.
4 [RETURN]
Returns the operation menu of the CEC-compatible
device to the previous screen.
Note
f If the operation menu of the CEC-compatible device cannot be called up from the HDMI-CEC operation screen, change the menu code
setting. For the operation details , refer to “Changing the menu code” (x page 98).
f If you cannot operate the operation menu of a CEC-compatible device, try setting the [PROJECTOR SETUP] menu → [HDMI CEC] to [OFF]
ENGLISH - 141
Chapter 5 Operation of Function - Using HDMI-CEC function
To Next Page
Loading...
