EasyManua.ls Logo

Panasonic SOLID SHINE PT-VMZ51 - Projector Specifications: Display and Lens; Display System and Device Specifications; Light Source, Screen Size, and Light Output

Panasonic SOLID SHINE PT-VMZ51
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specications
The specications of this projector are as follows.
Display system Translucent screen LCD panel x 3, 3 primary colors system
Display
device
Size of effective display
area
1.63 cm (0.64") x 3 (aspect ratio 16 : 10)
Number of pixels
PT-VMZ71, PT-VMZ61,
PT-VMZ51, PT-VMZ51S,
PT-VMZ41
2 304 000 pixels (1 920 x 1 200 dots)
PT-VMW61, PT-VMW51 1 024 000 pixels (1 280 x 800 dots)
Projection
lens
Supplied projection lens
Zoom ratio: 1.6 x
F = 1.6 to 2.12
f = 15.30 mm to 24.64 mm
Zoom Manual
Focus Manual
Lens shift Manual (Horizontal/Vertical)
Changeable lens No
Light source Laser diode
Screen size 0.76 m (30") to 7.62 m (300")
Light output
*1
PT-VMZ71 7 000 lm
When [PICTURE MODE] is set to [DYNAMIC],
[LIGHT POWER] is set to [NORMAL],
[DAYLIGHT VIEW] is set to [OFF], and [AUTO
POWER SAVE] is set to [OFF]
PT-VMZ61, PT-VMW61 6 200 lm
PT-VMZ51, PT-VMZ51S,
PT-VMW51
5 200 lm
PT-VMZ41 4 500 lm
Contrast ratio
*1
3 000 000:1
When [PICTURE MODE] is set to [DYNAMIC], [DYNAMIC CONTRAST] is set
to [1]
Center to corner zone ratio
*1
85%
Speaker
4.0 cm, round, x 1
10 W (monaural)
Displayable
scanning
frequency
Horizontal 15.6 kHz to 91.1 kHz
Vertical 24 Hz to 100 Hz
Input
compatibility
HDMI signal input
Video signal resolution:
480i
*2
/576i
*2
to 4 096 x 2 160/30p
Computer signal resolution:
640 x 400 to 1 920 x 1 200 (non-interlace)
Dot clock frequency:
25 MHz to 297 MHz
DIGITAL LINK signal input
Video signal resolution:
480i
*2
/576i
*2
to 4 096 x 2 160/30p
Computer signal resolution:
640 x 400 to 1 920 x 1 200 (non-interlace)
Dot clock frequency:
25 MHz to 297 MHz
COMPUTER signal input
Video signal resolution:
480i/576i to 1 920 x 1 080
Computer signal resolution:
640 x 400 to 1 920 x 1 200 (non-interlace)
Dot clock frequency:
13.5 MHz to 162 MHz
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 Only for Pixel-Repetition signal (Dot clock frequency is 27.0 MHz)
162 - ENGLISH
Chapter 7 Appendix - Specications

Table of Contents

Related product manuals