EasyManua.ls Logo

Panasonic SOLID SHINE PT-VMZ51 - Projector Specifications: Input, Power, and Environment; Input Compatibility and Acoustic Noise Levels; Operating Environment and Power Consumption

Panasonic SOLID SHINE PT-VMZ51
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connecting
terminals
<HDMI IN 1> terminal
<HDMI IN 2> terminal
HDMI x 2, HDCP compatible, Deep Color compatible
Audio signal Linear PCM (sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<DIGITAL LINK/LAN>
*1
terminal
RJ-45 x 1, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink (class
2) compatible, 100Base-TX, HDCP compatible, Deep Color compatible
<LAN> terminal RJ-45 x 1, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX
<COMPUTER 1 IN>
terminal
High-density D-Sub 15 p (female) x 1
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative polarity
compatible
VD
TTL high impedance, automatic positive/negative polarity
compatible
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<COMPUTER 2 IN>
terminal
High-density D-Sub 15 p (female) x 1
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative polarity
compatible
VD
TTL high impedance, automatic positive/negative polarity
compatible
YP
B
P
R
signal Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<AUDIO IN 1> terminal
<AUDIO IN 2> terminal
M3 stereo mini jack x 2, 0.5 V [rms], input impedance 22 kΩ or more
<VARIABLE AUDIO OUT>
terminal
M3 stereo mini jack x 1, monitor output and stereo compatible, 0 V [rms] to 2.0 V [rms]
(variable), output impedance 2.2 kΩ or lower
<USB (VIEWER/
WIRELESS/DC OUT)>
terminal
USB connector (type A) x 1, for Memory Viewer function/ Wireless module (Model No.:
AJ-WM50) connection/power supply (DC 5 V, maximum 2 A)
<SERIAL IN> terminal D-Sub 9 p x 1, RS-232C compliant, for computer control
Acoustic noise
*2
PT-VMZ71 38 dB
When [LIGHT POWER] in [ECO
MANAGEMENT] is set to [NORMAL] or [ECO].
PT-VMZ61, PT-VMZ51,
PT-VMZ51S, PT-VMZ41,
PT-VMW61, PT-VMW51
36 dB
PT-VMZ71 28 dB
When [LIGHT POWER] in [ECO
MANAGEMENT] is set to [QUIET]
PT-VMZ61, PT-VMZ51,
PT-VMZ51S, PT-VMZ41,
PT-VMW61, PT-VMW51
26 dB
Operating
environment
Operating temperature 0 °C (32 °F) to 45 °C (113 °F)
*3*4
Operating humidity 20 % to 80 % (no condensation)
Operation position [FRONT/CEILING], [FRONT/DESK], [REAR/CEILING], [REAR/DESK]
Power requirements
110 V ~ (110 V alternating current), 60 Hz (for Taiwan)
100 V - 240 V ~ (100 V - 240 V alternating current), 50 Hz/60 Hz (for other countries and
regions)
Rated current
PT-VMZ71
4.0 A (for Taiwan)
4.5 A - 1.9 A (for other countries and regions)
PT-VMZ61, PT-VMW61
3.5 A (for Taiwan)
3.9 A - 1.7 A (for other countries and regions)
PT-VMZ51, PT-VMZ51S,
PT-VMZ41, PT-VMW51
2.8 A (for Taiwan)
3.1 A - 1.3 A (for other countries and regions)
Maximum power consumption
PT-VMZ71 420 W (The power consumption is 410 W at 200 V - 240 V.)
PT-VMZ61, PT-VMW61 370 W (The power consumption is 360 W at 200 V - 240 V.)
PT-VMZ51, PT-VMW51 305 W (The power consumption is 295 W at 200 V - 240 V.)
PT-VMZ51S, PT-VMZ41 300 W (The power consumption is 290 W at 200 V - 240 V.)
*1 Not available for PT-VMZ51S and PT-VMZ41.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*3 The projector cannot be used at an altitude of 2 700 m (8 858') or higher above sea level.
If the operating environment temperature exceeds the following value, the light output may be reduced to protect the projector.
f When using the projector at an altitude lower than 700 m (2 297') above sea level: 36 °C (97 °F)
f When using the projector at an altitude between 700 m (2 297') and 1 400 m (4 593') above sea level: 34 °C (93 °F)
f When using the projector at an altitude between 1 400 m (4 593') and 2 100 m (6 890') above sea level: 32 °C (90 °F)
f When using the projector at an altitude between 2 100 m (6 890') and 2 700 m (8 858') above sea level: 30 °C (86 °F)
*4 The projector’s operating environment temperature should be within 0 °C (32 °F) to 40 °C (104 °F) when the optional wireless module
(Model No.: AJ-WM50) is attached.
ENGLISH - 163
Chapter 7 Appendix - Specications

Table of Contents

Related product manuals