Panasonic SOLID SHINE PT-VMZ51

[Network security] page
Make settings to protect the projector from external attacks via LAN and unauthorized use.
Click [Detailed set up] → [Network security].
1
2
1 [COMMAND PROTECT]
Make settings for the connection authentication when using the
command control function.
[DISABLE]: Connect to the projector in non-protected mode.
Connection authentication is not performed.
[ENABLE]: Connect to the projector in protected mode.
The user name and password of the administrator account are
required for the connection authentication.
2 [Submit]
Update the settings.
If you click [Submit] with [DISABLE] selected in [COMMAND
PROTECT], a conrmation screen will be displayed. Click [OK] on
the conrmation screen to update the settings.
Note
f When [COMMAND PROTECT] is set to [DISABLE], connection authentication is not performed, making it vulnerable to threats on the
network. Be aware of the risks before making settings.
f For details on how to use the command control function, refer to “Control commands via LAN” (x page 155).
[Status notication] page
Set the push notication function. A push notication of updated information is sent to the application software
linked to the projector, such as the “Multi Monitoring & Control Software”, when there is a change in status, such
as occurrence of an error in the projector.
Click [Detailed set up] → [Status notication].
1
2
3
4
1 [Error alert notication]
Set to [ENABLE] to use the push notication function.
2 [Notication IP address]
Enter the IP address of the notication destination.
3 [Notication port]
Enter the port number of the notication destination.
4 [Submit]
Update the settings.
ENGLISH - 133
Chapter 5 Operation of Function - Web control function