Need help?Do you have a question about the Panasonic TH-42PY80P and is the answer not in the manual?
General| Screen Size | 42 inches |
|---|---|
| Display Type | Plasma |
| Resolution | 1024 x 768 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| Component Video Inputs | 2 |
| Viewing Angle | 160 degrees |
| Response Time | 0.001 ms |
| RF Input | 1 |
| Audio Output | 20W (10W x 2) |
General safety guidelines to follow when servicing the unit.
Procedure for checking touch currents and acceptable voltage limits.
Methods to prevent component damage from static electricity during handling.
Details regarding lead-free solder composition (Sn+Ag+Cu) and its handling.
Hints for servicing, including board names and their functions.
Lists various applicable input signals for PC and other video sources.
Details the technical specifications of the unit, including power, sound, and connections.
Instructions on how to access and navigate the service mode using the remote control.
Details of adjustment modes and procedures for safely exiting service mode.
How to access service tool mode, view SOS history, and power on time.
Method to exit the service tool mode safely.
Instructions for accessing, explaining, and exiting the hotel mode setup menu.
Procedure for checking IIC bus lines to diagnose communication issues.
Guides for diagnosing and fixing "No Power" and "No Picture" issues.
Identifies potential faulty PCBs related to local screen failures on the plasma display.
Steps for removing major assemblies like the rear cover, fan unit, PB-Board, and P-Board.
Instructions for removing various boards such as A-Board, SU-Board, SD-Board, SC-Board, SS-Board, and D-Board.
Procedures for removing the plasma panel and stand brackets, and installing a new panel.
Preparation and adjustment steps for driver sections, including test point locations.
Procedures for adjusting initialization pulse and quick adjustments after PCB replacement.
Diagrams indicating the physical location of adjustment volumes and test points.
Comprehensive block diagrams illustrating the overall system architecture and component interconnections.
Visual diagrams illustrating internal wiring connections between various assemblies and boards.
Schematic diagrams for the P-Board, presented in two parts.
Detailed schematic diagrams for the A-Board, presented in sixteen sections.
Schematic diagrams for the D-Board, presented in six sections.
Schematic diagrams for the C1-Board, presented in three sections.
Schematic diagrams for the C2-Board, presented in three sections.
Schematic diagrams for the SC-Board, presented in three sections.
Schematic diagrams for the SU-Board, presented in two sections.
Schematic diagrams for the SD-Board, presented in three sections.
Schematic diagrams for the SS-Board (part 1) and S-Board.
Schematic diagrams for the GH, GS, and K-Boards.
Layout diagram of the P-Board, showing component placement on the foil side.
Layout diagrams for GH, K, and PB-Boards, showing foil and component sides.
Layout diagram of the A-Board, showing component placement on the foil side.
Layout diagram of the D-Board, showing component placement on the foil side.
Layout diagrams for the C1-Board, showing foil and component sides.
Layout diagrams for the C2-Board, showing foil and component sides.
Layout diagrams for the SC-Board, showing foil and component sides.
Layout diagrams for the SS-Board, showing foil and component sides.
Layout diagrams for the SU-Board, showing foil and component sides.
Layout diagrams for the SD-Board, showing foil and component sides.
Layout diagrams for the SS-Board, showing foil and component sides.
Layout diagrams for the SS-Board, showing foil and component sides.
Visual exploded view of the TV assembly, illustrating component placement.
Comprehensive list of mechanical replacement parts, including safety notices.
Important notes and definitions for understanding the electrical replacement parts list.
Detailed list of electrical components, including part numbers and specifications.
To Next Page