6.1. Remove the Back cover
1. See Service Hint. (Section 5)
6.2. Remove the fan
1. Disconnect the relay connectors.
2. Remove the screws (×3
each) and remove the fan unit
A.
3. Disconnect the relay connectors.
4. Remove the screws (×4
) and remove the fan unit B.
6.3. Remove the rear terminal
cover
1. Remove the screws (×7 ,×6 ,×1 ,×2 ).
2. Remove the rear terminal cover.
6.4. Remove the tuner unit
1. Remove the screws (×3 ).
2. Remove the tuner unit mounting metal.
3. Unlock the cable clampers to free the cable.
4. Disconnect the connectors (DG1, DG5, DG35, DG52, H5,
H10, H11, H12, H30 and H51).
5. Remove the screws (×4
) and remove the tuner unit.
6 Plasma panel replacement method
9
TH-42PZ77U