Panasonic th-50ph10uk - Removal of the P-Board; Removal of the DN-Board; Removal of the H3-Board (L, R); Removal of the SU-Board and the SD-Board

6.7. Removal of the P-Board
1. Disconnect the connectors (P2, P6, P7, P9, P11, P12,
P25).
2. Remove 6 screws (
) and then remove the P-Board.
6.8. Removal of the DN-Board
1. Remove the flexible cable from the connectors (DN1).
2. Disconnect the connectors (D6, D31, D33, D35).
3. Remove 4 screws and then remove the DN-Board.
6.9. Removal of the H3-Board (L,
R)
1. Remove each 1 screw and then remove the Speaker
Terminal Block (L, R).
2. Disconnect the connector (H37).
3. Remove 3 screws (F) and then remove the H3-Board.
6.10. Removal of the SU-Board and
the SD-Board
1. Remove the Speaker Terminal Block(R).
(Reference to Removal of the H3-Board (L, R))
2. Remove the Flexible cables (SU1, SU2, SU3, SU4,)
connected to the SU-Board and remove the connector
(SC45-SU45).
3. Remove 6 screws.
4. Slide the SU-Board to the left to disconnect from a
connector (SC41-SU41) on the SC-Board and remove the
SU-Board.
5. Disconnect the connectors(SU45, SD46).
6. Slide the SU-Board and the SD-Board to the left, remove
the SU-Board and the SD-Board from the connectors
(SC41, SC42).
11
TH-50PH10UK