Panasonic th-50ph10uk - Table of Contents; Fixing Bands; Lead Wiring

1 Applicable signals 4
2 Safety Precautions
5
2.1. General Guidelines
5
3 Prevention of Electrostatic Discharge (ESD) to
Electrostatically Sensitive (ES) Devices
6
4 About lead free solder (PbF)
7
5 Service Hint
8
6 Disassembly
9
6.1. Removal of the Back Cover
9
6.2. Removal of the HU-Board
9
6.3. Removal of the HA-Board
9
6.4. Removal of the DS-Board
9
6.5. Removal of the HX-Board
10
6.6. Removal of the D-Board
10
6.7. Removal of the P-Board
11
6.8. Removal of the DN-Board
11
6.9. Removal of the H3-Board (L, R)
11
6.10. Removal of the SU-Board and the SD-Board
11
6.11. Removal of the SC-Board
12
6.12. Removal of the SS2-Board and the SS3-Board
12
6.13. Removal of the SS-Board
12
6.14. Removal of the stand blocks
12
6.15. Removal of the C1, C2, and the C3-Board
13
6.16. Removal of the S1-Board
13
6.17. Removal of the Fan 14
6.18. Removal of the Escutcheon
14
6.19. Removal of the V1-Board and the V2-Board
14
6.20. Removal of the Plasma Panel
15
7 Location of Lead Wiring
19
7.1. Lead Wiring (1)
19
7.2. Lead Wiring (2)
20
8 Adjustment Procedure
21
8.1. Driver Set-up
21
8.2. Initialization Pulse Adjust
22
8.3. P.C.B. (Print Circuit Board) Remove
22
8.4. Adjustment Volume Location
23
8.5. Test Point Location
23
9 Service mode
23
9.1. CAT (Computer Aided Test) mode
23
9.2. IIC mode structure (following items value is sample data.)
27
10 Adjustment
28
10.1. RGB white balance adjustment
28
10.2. HD white balance adjustment
30
10.3. Power control adjustment
32
11 Trouble shooting guide
33
11.1. Self Check
33
11.2. No Power
35
P
B
/B (BNC), P
R
/R (BNC) 0.7 Vp-p (75-ohm)
A
UDIO IN (RCA PIN JACK
x
2) 0.5 Vrms (high impedance)
PC IN (HIGH-DENSIT
Y
MINI-D-SUB 15PIN)
Y
or G with/syn
c
1.0 Vp-p (75-ohm)
Y
or G without/sync 0.7 Vp-p (75-ohm)
B
/
P
B
/
C
B
:0.7 Vp-p (75-ohm)
R/PR/CR:
0.7 Vp-p (75-ohm)
HD
/
VD:1.0 - 5.0 Vp-p (high impedance)
A
UDIO IN (M3 JACK) 0.5 Vrms (high impedance)
SERIAL EXTERNAL CONTROL TERMINAL (D-SUB 9PIN) RS-232C COMPATIBLE
SPEAKERS (6Ω) 16 W [8 W + 8 W] (10 % THD)
Accessories Supplied
Remote Control Transmitter EUR7636070R
Batteries 2×
AA
Size
Fixing bands TMME203 × 2
Dimensions (
W
×H×D) 47.6” (1,210 mm) × 28.5” (724 mm) × 3.7” (95 mm)
Mass (weight)
main unit onl
y
approx. 79.4 lbs
with speakers approx. 88.2 lbs
Notes:
· Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
CONTENTS
Page Page
2
TH-50PH10UK