- 144 -
Updating the TV Software
Information
A new version of software may be released for download to enhance the
performance or operations of the TV.
If there is an update available and the channel has the update information, a
notification message is displayed.
●
To download
OK
– Press EXIT when not downloading
Auto update
You can update new software automatically.
1. Display the menu with MENU
2. Select Setup
System Menu System Update Auto Update Search in
Standby with / and press OK to access
3. Select Immediately / 1 hour after / Off with
/ and press OK to set
●
If System Update is performed, the software will be updated (TV functions
may be changed). If you do not want to do so, set Auto Update Search in
Standby to Off.
●
Every time you set, the TV automatically performs search in Standby and
downloads an update if any software updates are available.
●
The automatic updating is performed under the following conditions:
– Standby (TV turned off by the remote control)
– Recording by Timer Programming or One Touch Recording is not in
progress.
= Note =
●
Download may take a few hours.
●
During software download and update, DO NOT switch off the TV.
●
A notification message may be a reminder. In this case, schedule
information (the date when the new version can be used) will appear. You
can set the reservation for update. The update will not start when the TV is
off.
To Next Page
Loading...
