- 50 -
Auto Tuning
Automatically retunes the channels received in the area.
●
All the previous tuning settings are erased.
●
Search begins in the order from the lower channels to the higher channels.
●
If tuning has not been done completely, set Manual Tuning.
Watching Tuning and editing channels Manual Tuning
1. Select Auto Tuning with / and press OK to access
2. The confirmation screen is displayed and press OK to start Auto Tuning
(Settings are made automatically)
●
When the operation is completed, the channel at the lowest position will
be displayed.
●
This setting is applicable only for the selected TV mode.
■ Auto Tuning using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set Auto Tuning with following control panel buttons
●
Move the cursor / select from a range of options / select the menu item
(up and down only)
●
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button.
Manual Tuning
■ Digital TV
Normally use Auto Tuning or Update Channel List to retune Digital TV
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
●
All Digital channels found will be added to Channel List.
1. Select physical channel with
/ and select offset with /
2. Press OK to search
To Next Page
Loading...
