- 61 -
■ To adjust the clock
If you cannot get the time information, set Clock Settings manually.
1. Display the menu with MENU
2. Select Timer
Clock Settings Mode with / and press OK to
access
3. Select Manual with
/ and press OK to set
4. Set Date / Time with
/ / / or numeric buttons
●
Clock Settings are reset when the TV is turned off with Mains power On /
Off switch.
Settings Timer Clock Settings
■ To play back or delete the recorded contents
TV programmes recorded on the USB HDD with this TV can be played back
in Media Player.
1. Display icons of the feature with APPS
2. Select Recorded TV with
/ / / and press OK to access
Media Player Recorded TV mode
Note
●
TV Guide may also be used to set timer programming event.
Watching TV Guide Timer Programming
●
Timer Programming can store up to 15 events.
●
Timer Programming only works reliably if correct time information is
received via the signal from the broadcaster or service provider.
●
For recording using Timer Programming, the TV must be either on or in
Standby. For reminders to be displayed, the TV must be on.
●
No other channels can be selected while the recording of Timer
Programming is in progress.
●
Recording an encrypted (copy-protected) programme may not be possible.
●
2 minutes before the starting time, a reminder message appears if you are
watching TV.
– To remove the message and start the programming, press OK.
– To cancel the programming, press EXIT.
●
LED will turn to orange in Standby mode if Timer Programming is set.
To Next Page
Loading...
