- 152 -
Settings
Setting menu
How to use
Various menus allow you to make settings for the picture, sound, and other
functions.
1. Display the menu with MENU
●
Displayed items vary depending on the input signal.
2. Select the menu with
/ and press OK to access
3. Select the items with
/ and press OK to access
●
Only available items can be selected.
●
You can also access from eHELP pressing (red) at each item. (if
available)
●
You can select from among alternatives with / and press OK to set.
●
You can adjust using the slide bar with / and press OK to set.
●
You can go to the next screen with OK.
●
You can enter names or numbers freely for some items.
1) Enter characters one by one with
/ / / and press OK to set
– You can set characters using numeric buttons.
Functions Setting characters Using numeric buttons
2) Press RETURN to store
●
To reset the settings
– To initialise picture or sound settings only, select Reset Picture Defaults
in the Picture Menu or Reset Sound Defaults in the Sound Menu.
Settings Picture Reset Picture Defaults
Settings Sound Reset Sound Defaults
– To initialise all settings, select Shipping Condition.
Settings Setup System Menu
●
To exit the menu screen
EXIT
●
To return to the previous screen
RETURN
To Next Page
Loading...
