- 31 -
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
●
Off Timer is active.
Watching Basic Off Timer
●
No operation is performed for 4 hours while Auto Standby is set to On.
Settings Timer Auto Standby
●
No signal is received and no operation is performed for 10 minutes while
No signal Power off is set to On.
Settings Timer No signal Power off
= Note =
●
This function does not affect the recording of Timer Programming and One
Touch Recording.
Aspect
Change the aspect ratio (image size) with ASPECT.
●
Enjoy viewing the image at its optimum size and aspect.
■ To change the aspect ratio manually
1. Display Aspect Selection list with ASPECT
2. Select the mode with
/ and press OK to set
●
You can also change the mode pressing ASPECT.
(Press repeatedly until you reach the desired mode.)
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
14:9:
Displays the image at the standard 14:9 without distortion.
Just:
Displays a 4:3 image full-screen. Stretching is only noticeable at the left
and right edges.
4:3:
Displays the image at the standard 4:3 without distortion.
Zoom:
Displays a 16:9 letterbox or 4:3 image without distortion.
To Next Page
Loading...
