- 22 -
Adjusting time
■ Adjust the standard time
Select the region where you live to adjust the standard time. (Base on GMT)
1. Display the menu with MENU
2. Select Timer
Clock Settings Region Select with / and press OK
to access
3. Select the region with
/ and press OK to set
NSW / ACT / Victoria / Queensland / South Australia / Western Australia /
Northern Territory / Tasmania
●
The time contained in the broadcast signal is UTC (Universal Time
coordinated) formally known as GMT (Greenwich Mean Time).
NSW / ACT / Victoria / Queensland / Tasmania: +10:00
South Australia / Northern Territory: +9:30
Western Australia: +8:00
■ Adjust for Summer Time
Select time offset from the standard time for Summer Time. (Base on GMT)
1. Display the menu with MENU
2. Select Timer
Clock Settings Daylight Saving Time with / and
press OK to access
3. Select Auto / Off / + 1/2 hour / + 1 hour with
/ and press OK to set
●
If there is a gap between displayed time and actual time, set this function.
●
Normally select Auto to adjust as following for the region has been set in
Region Select.
NSW / ACT / Victoria / Tasmania: +11:00
South Australia: +10:30
Queensland: +10:00
Northern Territory: +9:30
Western Australia: +8:00
To Next Page
Loading...
