- 58 -
■ To stop REW LIVE TV
1. Display the menu with MENU
2. Select Setup
Recording Setup REW LIVE TV with / and press
OK to access
3. Select Off with
/ to stop REW LIVE TV
●
If you stop REW LIVE TV, the recorded content for REW LIVE TV will be
deleted.
●
REW LIVE TV will be stopped and the recorded content will be deleted
automatically in the following conditions: (Even if REW LIVE TV stops for
the following conditions, as long as the setting is Auto, a new recording will
start automatically in a condition that makes the recording available.)
– Other channels selected
– Locked channel selected
– Invalid channel selected
– No TV signal
– When another recording starts
– When the TV enters Standby or is turned off
Timer Programming
Setting timer programming
The Timer Programming menu allows you to select programmes that you
want to be reminded to watch or record to the USB HDD. At the correct time,
the TV will tune to the correct channel even if the TV is in Standby mode.
●
Not valid in Analogue TV
1. Select Digital TV with TV
2. Display the menu with MENU
3. Select Timer
Timer Programming with / and press OK to access
■ Set timer programming event details
1. Press OK to start making the settings
2. Select USB HDD Rec. / Reminder with
/
USB HDD Rec.:
Records the programme to the USB HDD.
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 minutes before the
starting time, a reminder message appears if you are watching TV.