- 44 -
3D Settings
1. Display the menu with MENU
2. Select Picture
3D Settings with / and press OK to access
3. Select one of the following items with
/ and press OK to access
3D Detection / 3D Signal Message / 2D
3D Depth / 3D Adjustment / L/R
Picture Swap / Edge Smoother / Safety Precautions
4. Set with
/ / / and press OK to store
●
To exit the menu screen
EXIT
3D Detection
(On (Advance) / On / Off)
Selects whether to switch to the 3D mode automatically.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
●
To view 3D images without any notifications and operations, set to On
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found.
●
Not valid when 3D Detection is set to On (Advance)
●
For Digital TV, Component and HDMI input
2D
3D Depth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.
To Next Page
Loading...
