57
߱ᔎ㊾2Ɯ5ྈʁ ŊଔሳߊӷԊɺΤᯉㄇȯ
⥑હʴരŊྈʁ
ŊʬʃሳߊӷԊㄇ᱿ᯉㄇȯ
ሷƩὪ⚦᱿ᯉㄇŊ֯ᆯᄽㆴḻᑁೣ˜˫ʑᄽㆴḻȯ
The selected volume
level is displayed
here.
ㆴḻⴆႹ᱿⨸بㅠ⸇
▼
▼
▼
▼
▼
Buzzer volume High, Medium, Low /ȵ⨸بㅠ⸇ȶ᱿ʑଅ
After about 3 seconds
₎3ấര
Electrolysis signal OFF (ON) /ȵヅ⤟Β⚦ȶ᱿ OFFņONŇ
If “ON” was selected, the
“
ヅ⤟Β⚦ȵONȶરᯃ
”
message is displayed.
ⴆȵONȶᆹŊㆴḻᣅȵヅ
⤟Β⚦ȵONȶરᯃȶ
▼
▼
▼
▼
▼
▼
Exit the
setting mode?
Yes
No
⥑હ᱿ᅞᘍ
ņ〦ᅠ⦀₳⥑હㅮᲿُ⫵⫀ᆹ᱿⥑હ⦼א〇 53 ㅪŇ
Balance cartridge life
display (standby status
ᡇൔلㆴḻņഩᑨᨊ๗Ň
Example /
Select “ ʃᆯ ” to set another item.
↧↲⥑હҢ˟ㅮᲿᆹŊⴆȵʃᆯȶ
If “ ʃᆯ ” was selected, go back to step 3.
ⴆȵʃᆯȶᆹӷᔎ㊾ 3
Continued on next page/ʁㅪ
Select the desired volume
level.
Example: Set the level to
High.
ⴆႹᓥ⥑હㅠ⸇
ņŇ⥑હȵȶ
Select “ON” to
set this item
ON
ON ᆹⴆႹȵONȶ
Mode selection
Setting mode
Check mode
Setting mode
pH fine adjustment
Continue mode
Water output buzzer
Setting mode
Weak acidic buzzer
Alkaline priority
Buzzer volume
Buzzer volume
High
Medium
Low
Buzzer volume
High
Medium
Low
Buzzer
volume now
set to High.
Mode selection
Setting mode
Check mode
Setting mode
pH fine adjustment
Continue mode
Water output buzzer
Setting mode
Electrolysis signal
Measurement condition setting
Exit
Electrolysis signal
ON
OFF
Electrolysis signal
ON
OFF
Electrolysis
signal now
set to OFF.
ZGS0TK7585HKE0Z.indb 57ZGS0TK7585HKE0Z.indb 57 2009/12/09 9:51:002009/12/09 9:51:00
To Next Page
Loading...
