Panasonic TX-PR42U10 - Service Mode Operations; Entering Service Mode; Key Commands and Navigation

5 Service Mode
5.1. How to enter into Service Mode
While pressing [VOLUME ( - )] button of the main unit, press [0] button of the remote control three times within 2 seconds.
Software version ■
Picture adjustment ----------
White balance adjustment
Option setting -----------------
Agig -------------------------------
Service tool
SERVICE
ADJUST
WB-ADJ
OPTION
AGING
SRV-TOOL
1
Peaks SOFT
*.***
OPTION 1 1c
Peaks EEP
OPTION 2 ef
LSI DATA
OPTION 3 01
STBY SOFT
Model ID 05
STBY EEP 02203100
STBY ROMCOR 00000040
PDP SOFT RB Cn+ 000
PDP EEP
PDP FPGA
PDP PDROM
Press
[1]
Button
I Sub Item
1 1
Ia d j u s t " i '
'CONTRAST i '0000i
YMAX
5.1.1. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[RED] button...All Sub items Selection in forward direction
[GREEN] button...All Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + in reverse direction ( - )
9