163
631 XMT A "STOP" button was pressed during
Auto Dialing.
634 XMT B Redial count over with no response
or busy tone was not detected.
Note: U.S.A. / Canada models will
redial only once if busy tone is not
detected.
638 XMT Power turned off with applicable
data in memory or during
communication.
Power switched off.
Power failure occurred.
741 XMT,
Polling
Unable to dial Deleted the registered station
name before dialing with Timer
Controlled Communications, etc.
800 Relay
Comm.
The machine was requested to
relay a document but has no Relay
Hub capability.
815 Conf. RCV Mailbox is full.
816 Conf.
Polled
The received Polling Password did
not match.
825 Conf. RCV
Conf.
Polled
Parameter settings of the remote
station are not properly set.
870 MEM XMT
Multi-Copy
Memory overflow occurred while
storing documents into memory.
880 - - File Access Error.
884 - - File Access Error.
Information Codes
Code Mode Phase Description of Problem Cause
To Next Page
Loading...
