Panasonic UF-890 - Low Voltage Power Supply Unit (502), FCB PC Board (522), LCU PC Board (519), LPC PC Board (555), Control Panel Unit, PNL PC Board (214)

23
2.5 Low Voltage Power Supply Unit (502), FCB PC Board (522),
LCU PC Board (519), LPC PC Board (555), Control Panel Unit, PNL PC
Board (214)
(1) Remove the Left Side Cover (107) and the Rear
Cover (108)
(Refer to 2.3).
(2) 3 Screws (19) and 1 Screw (G7).
(3) Pull out the Low Voltage Power Supply
Assembly.
(4) Disconnect 4 Connectors on the Low Voltage
Power Supply Assembly.
(5) Remove the Mylar Shield (508).
(6) 3 Screws (19) and 1 Washer (G8).
(7) Remove the Low Voltage Power Supply Unit
(502).
(8) Disconnect all Connectors on the FCB PC
Board.
(9) 6 Screws (C8).
(10) Remove the FCB PC Board (522).
(2)
(3)
(5)
(4)
(4)
(7)
(6)
(9)x6
(10)
(8)